ServicesMechanical integrity
Mechanical integrity and fitness for service
The inspection report says what was found. ARPE evaluates the finding and gives the engineering disposition.
TBPELS F-22694
When to call
Call ARPE when
- An inspection report shows a condition, and nobody on site can say what it means for the equipment.
- Aging equipment needs a decision on whether it can keep running.
- A vessel needs the calculations for a re-rate, repair or alteration.
- You have corrosion monitoring data and need an engineering evaluation of it.
- You need an equipment register to start a mechanical integrity program.
- Your containment or dikes need an engineering assessment.
- A boiler needs mechanical integrity, root cause or repair engineering.
- A turnaround needs engineering support in the field.
- The mechanical integrity program needs improvement.
What you get back
What a fitness for service answer can be
Fitness for service work follows API 579-1/ASME FFS-1, at Level 1 and Level 2.
Continue as is
Continue with conditions
Such as monitoring or a shorter inspection interval.
Re-rate
Repair
Replace
What we do
Services in this area
Fitness for service
- API 579-1/ASME FFS-1 Level 1 and Level 2 evaluations
- Remaining life assessments
- Inspection data review and engineering disposition
Corrosion and damage
- Engineering evaluation of corrosion monitoring data
- Damage mechanism review
Re-rate, repair and alteration calculations
- Pressure vessels modeled in COMPRESS
- The drawing and engineering report from the model
Programs
- Mechanical integrity program improvement
- Equipment health assessments
Equipment register
- A list of your fixed equipment with nameplate data, data reports where they exist, photos and design codes, to start a mechanical integrity program.
Containment and dike assessments
- A containment map, a capacity check, a repair priority list and a repair scope contractors can bid.
Boilers
- Mechanical integrity, root cause failure analysis, turnaround and repair engineering for boilers
What to send
What to send for a fitness for service review
Send what you have. These items help the review start.
- Nameplate or manufacturer's data report (such as a U-1A)
- Design conditions
- The inspection report with thickness readings or flaw sizes
- Past inspection history and corrosion rates
- Current operating conditions
- The decision needed and its date
Calculations
The drawing and the report come from the same model.
Pressure vessel and heat exchanger calculations are modeled in COMPRESS, and each job comes with the drawing and engineering report from the model.
Turnaround and field engineering
Engineering support for outages.
Engineering support in the field during turnarounds and outages. That includes turnaround and repair engineering for boilers.
Before the outage
- Engineering input to the inspection plan
During the outage
- Repair disposition support
- Contractor technical coordination
- Rapid engineering response during outages
Closing out
- Punch list resolution
- Commissioning support
ARPE's core work is the engineering side. The inspector finds the problem and ARPE says what it means.
We work from your inspection data, or alongside your inspection company. Inspection companies can read more on their own page.
Sealed deliverables when required. Sealed by Ryan Powell, PE, licensed in Texas and California, for work he performs or directly supervises.
